Here, you can define the section display and the properties of infills.
Dialog box Infill parameters
db_ath_panel_cs
Dialog box section Representation
Left
Creates the left side of an infill, the right side is interrupted.
Complete
Creates a complete infill without interruption.
Right
Creates the right side of an infill, the left side is interrupted.
Mirror
Mirrors the infill about its own axis.
Explode
Releases the infill into its constituent parts. With a double click the exploded infill can no longer be edited as a whole, but instead only its layers.
Dialog box section Insert
Length, Inset, Gasket thickness
With the buttons Length <, Inset < and Gasket thickness < you can access the appropriate values from the drawing. When you click one of the buttons, the dialog box is temporarily closed and you can select two points. The distance between the points is transferred into the corresponding input field. Alternatively, you can also write the value directly into the corresponding input field.
The insertion point of the infill is changed according to the entries made here, so that it can be correctly positioned.
Dialog box section Output
Insert text
Activate this tick box to label a layer.
Text height
Defines the text height of the label text.
Default
Restores the default text height (current figure height dimension).
Dimension
If you activate the tick box, the infill is dimensioned.
Dialog box Overlaps
db_ath_panel_ueberstand
List
Shows the available infill layers. Select a layer here to change its overlap.
Overlap left
Defines the left overlap of the marked layer. The value entered here is adopted as default for the right side.
