Overwrites infill definitions on the left or right side of an inserted cross section.

On the left side of the dialog box you can see the preview of the side of the infill.

Shows the preview of the current infill and side (either left or right) The active layer is marked in red. The layer structure is located on the weather side at the top.

Defines the overlap of the selected layer.

Activate the tick box to define an edge spacer for the layer.
Select insulating glass to use a predefined edge spacer for insulating glass. Click [...] to choose an insulating glass edge spacer in the Dialog box Edge spacer.
Select Spacer to use a rectangular edge spacer. Click [...] to adapt the spacer properties. You will find further information in the Chapter Spacer. Choose Profile to use a freely defined profile as the edge spacer. The profile definition occurs in the Dialog box Bar assembly manager. You will find further information in the Chapter Edit bar assembly (extended).

The tick box activates the folding capability of a sheet-metal layer. When you activate the tick box, the Dialog box Select objects is opened, where you can select a fold sequence.

Inverts the elevation side of the metal sheet. This function is not available when a sheet with folds is used in an external view (weather side or inside).

Opens the Dialog box Select objects, where you can load a saved fold sequence. Siehe Object selection.

This section is displayed with profiled panels.

Defines the distance from the sheet edge to the first fold.

Defines the gradient of the receptacle.

Resets the side of the infill to the defined properties.

OK adopts the settings made and terminates the dialog box. Cancel discards the settings made before the dialog box is closed.