Tab SchüCad next > Group Drawing > Insert sealing tape
Menu:
SchüCad next > Drawing > Insert sealing tape
Toolbar:
SchüCad next Drawing > Insert sealing tape
Command input:
_sSealingtape
You may use the command to display sealing tapes in any cross-section of any hatch size. The depiction is possible for parallel and non-parallel boundary edges.
Design points
Input request
Select first boundary edge:
Click on the first boundary edge (G1).
Select second boundary edge:
Click on the second boundary edge (G2)
Please select the first delimitation point:
Click on the first point for the boundary (P1)
Please select the second delimitation point:
Click on the second point for the boundary (P2)
Specify hatch pattern size or [Adapt]:
Enter the desired distance of the lines of the hatching pattern in millimeters in the command line or leave the default value.
Press the Enter key.
The sealing tape is inserted.
The selected hatching line spacing may be unfavorable for a plot output of the drawing depending on the scale selected. In the printout, the sealing tape may then be completely filled or it may not contain any hatching. In this case, adjust the hatch line spacing for the selected output scale.
