When you click on an existing LogiKal element, this command is started and you can modify the selected element.

In the dialog box a preview is shown at the upper left. It provides a visual check of the position.

On the right side of the dialog box there is the operating section with the register buttons:

Here, the job and position properties of the LogiKal element are shown. Changes cannot be made here.

Defines the lot for the position. Lots must be defined in LogiKal.

Defines the status for the position.

Defines the position label. You can save the label in various languages. To do this, choose the required language from the list.

Opens the Dialog box Designation, where you can conveniently edit the designations for various languages. You will find further information in the Chapter Designation.

Starts Dialog box Modify LogiKal element, where you can select which position property you want to modify.

Controls the display of symbols (for example tilt and turn symbols) of the sashes and elements.

Opens the Dialog box Assign layer. You will find further information on this in the Chapter Assign layer.

Controls whether the element is dimensioned.
The drawing dimension settings are used for dimensioning. Dimension style, actual text height and dimension layer are displayed for information.

Switches the automatic labeling of the elements on or off.

Switches the automatic labeling of the inserts on or off.

Switches the automatic labeling of the infill on or off.

Switches the automatic labeling of the bars on or off.

Opens the dialog box Label format for the relevant object. You will find further information on this in the Chapter Label format.

Opens the Dialog box Label for the element. You will find further information on this in the Chapter Label.

Applies the settings to all insertions of the element.

Applies the settings made only to the current insertion of the element.

Applies the settings made to all new insertions of the element.

The list shows the infills of the current element. Here, you select the infill, the properties of which you want to change.

Causes infills defined in SchüCad next to be used.

Opens the Dialog box Select objects, where you can load a saved infill. See Object selection.

See section Management of objects.

Closes the dialog box and the selected position is updated.

Closes the dialog box and discards the changes.